Prepara Primeprint per la stampa 3D
Di seguito è possibile scaricare il software inLab CAM 22 necessario per operare con Primeprint. Inoltre, forniamo anche il software inLab CAD, le app inLab e il software CEREC. Per utilizzare il software, è necessaria una licenza valida. In caso di domande, contatta il tuo rivenditore Dentsply Sirona.
Software inLab CAM, Software inLab CAD e applicazioni
inLab CAD SW 22.1.0 6 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
inLab CAM SW 22.1.0 2 GB
inLab CAM SW 22.1 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
inLab Model 22.0.2 596 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
inLab Splint 22.0.2 576 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
inLab Partial Framework 22.0.1 577 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
inLab CAD & CAM SW 22.1.0 Update Description
This document describes all changes compared to the previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
Aggiorna descrizioni inLab
inLab CAD & CAM SW 22.1.0 Update Description 2 MB
This document describes all changes compared to the previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
inLab CAD & CAM SW 22.0.0 Update description
This document describes changes and improvements compared to previous version inLab CAD 20.0.4 & inLab CAM 20.0.1
CEREC Software
L’installazione del software richiede una licenza CEREC SW 5.2.
CEREC SW 5.2.3 4 GB
The update CEREC SW 5.2.3 is also distributed via AutoUpdate.
Aggiorna descrizioni CEREC
Update Description CEREC SW 5.2.3 171 kB
Update Description CEREC SW 5.2.3
Connect Software
Qui puoi scaricare l’attuale Connect Software. Questa versione supporta Primescan AC, CEREC Primescan AC, Omnicam AC e CEREC Omnicam AC (Windows 10). A causa dei diversi tempi di approvazione e registrazione, non tutti i prodotti sono immediatamente disponibili in tutti i Paesi.
Connect SW 5.2.3 2 GB
Connect SW 5.2.3 Update
Connect SW 5.2.2 2 GB
Connect SW 5.2.2 Update
